LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (13 Engine - Crank Drive, Pistons 2.0L -- 95B - MACAN (95B)) >> WM, 137319 - Removing And Installing Belt TENSIONER (R4) >> Installing Belt TENSIONER

Installing Belt TENSIONER

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace screws on belt tensioner.
    2. 1.2  Tighten belt tensioner screws.

      Initial tightening 8 Nm (6 ftlb.) 

      Final tightening + 90 (67 ftlb.) ° 

scientia non olet · About LEMON Manuals