Further To 3: Mounting Wheel On The Vehicle

Information 

> 440519 - REMOVING AND INSTALLING WHEEL 

• No force or impact tools allowed (for example, impact drivers). 
• See description for removing and fitting wheels (fitting wheel on the vehicle). 
• Install the wheels with the lowest residual imbalance values on the front axle. Be sure to note the running direction of the tyres. 

1. Fit wheel.

   > 440519 - REMOVING AND INSTALLING WHEEL - PORTION ON "INSTALLING" 

2. Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening. Always observe the specified tightening torque.

   > Tightening - torque 160 Nm (118 ftlb.) 

3. Set tyre pressure according to specifications (tyre pressure plate).