Removing Servo Motor For Rear Temperature Valves

NOTIFICATION 

Voltage peaks 

• Risk of damage to electrical load or to the control unit 

  → Remove the ignition key and switch off load before disconnecting or removing load.

1. Removing servo motor for rear temperature valves -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Servo motor for rear temperature valves

1. 1.1 Push carpet aside slightly to allow access to the servo motor.
2. 1.2 Release and disconnect electric plug connection -2-  .
3. 1.3 Unscrew screws -3-  .
4. 1.4 Remove servo motor for rear temperature valves -1-  together with the holder.