Replacing Sealing Ring For Rear Transfer Box

WARNING: This page is about a different variant/trim than selected.

Remove sealing ring for rear transfer box -1- using > VAS 6965 - puller set .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing sealing ring for rear transfer gear
Clean the sealing face.
Install new sealing ring for rear transfer box. > Installing sealing ring for rear transfer gear
3.1 Tap in sealing ring for rear transfer box evenly using > 9881 - pressure piece and a plastic hammer.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing sealing ring for rear transfer gear