LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (43 Leveling System, Air Suspension, Damper Control 2.0L -- 95B - MACAN (95B)) >> WM, 431619 Removing And Installing Control Unit For Chassis Control >> Installing Control Unit For Chassis Control

Installing Control Unit For Chassis Control

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening nuts on control unit for chassis control to > Tightening - torque 4.3 Nm (3.2 ftlb.)  .

scientia non olet · About LEMON Manuals