Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for fuel line | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| Fastening screw for camshaft sensor | Tightening torque | 9 Nm (6.6 ftlb.) | |||
| Adapter for fuel supply line/high-pressure pump | Replace/coat thread with clean engine oil | Tightening torque | 40 Nm (30 ftlb.) | ||
| Union nut for fuel supply line | Coat ball with clean engine oil | Tightening torque | 20 Nm (15 ftlb.) | ||
| Adapter for fuel supply line/fuel distributor | Replace/coat thread with clean engine oil | Tightening torque | 40 Nm (30 ftlb.) | ||
| Fastening screw for intake-air distributor | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw-type clamp securing moulded hose to intake-air distributor | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Fastening nut for fuel supply line | Coat ball with clean engine oil | Tightening torque | 20 Nm (15 ftlb.) | ||
| Fastening screw securing intake manifold support | Tightening torque | 20 Nm (15 ftlb.) | |||
| Fastening nut for intake manifold support | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Fastening screw securing coolant pipe to intake manifold | Tightening torque | 6 Nm (4.5 ftlb.) |