LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (24 Fuel System - Electronic Injection 2.0L -- 95B - MACAN (95B)) >> WM, 242519 Removing And Installing Air Cleaner Housing (R4) >> Installing Air Cleaner Housing

Installing Air Cleaner Housing

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw securing air cleaner housing to body.
      • Tightening torque 3.5 Nm (2.5 ftlb.) 
    2. 1.2  Tighten screw-type clamp.
      • Tightening torque 5.5 Nm (4 ftlb.) 
scientia non olet · About LEMON Manuals