Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screw securing oil intake tube to oil pump | M6 x 26 | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw securing oil intake tube to oil pump | M6 x 26 | Final tightening | + 90° | ||
| Screw securing oil guide housing to crankcase | M6 x 22 (19 ea.)/replace, observe tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw securing oil guide housing to crankcase | M6 x 22 (19 ea.)/replace, observe tightening sequence | Final tightening | + 90° | ||
| Screw securing chain housing cover to oil guide housing | M6 x 25 (6 ea.)/replace, observe tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw securing chain housing cover to oil guide housing | M6 x 25 (6 ea.)/replace, observe tightening sequence | Final tightening | + 90° |