LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (17 Engine - Lubrication 3.0L -- 95B - MACAN (95B)) >> WM, 172619 Removing And Installing Pressure-Regulating Valve (V6 Turbo) >> Installing Pressure-Regulating Valve

Installing Pressure-Regulating Valve

WARNING: This page is about a different variant/trim than selected.
  1. installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-ring on pressure-regulating valve.
    2. 1.2  Tighten screw on pressure-regulating valve.
      • Tightening torque 9 Nm (6.5 ftlb.)