LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 MONOTURBO) >> Installing Pressure Pipe >> Installing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

Installing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw-type clamps on pressure hoses.
      • Tightening torque 5.5 Nm (4 ftlb.)