LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (19 Engine - Cooling 3.0L -- 95B - MACAN (95B)) >> WM, 192019 Removing And Installing Cooling Fan Housing (V6 Turbo) >> Removing Cooling Fan Housing

Removing Cooling Fan Housing

WARNING: This page is about a different variant/trim than selected.
  1. Remove cooling fan housing -1-  .
    G15149838Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cooling fan housing

    1. 1.1  Release locking lugs -2-  on both sides using a screwdriver -arrow A-  , lift the cooling fan housing -1-  up out of the guides -arrow B-  and remove it from the radiator.