LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (28 Ignition System, PREGLOW System 3.0L -- 95B - MACAN (95B)) >> WM, 287319 Removing And Installing Pulse Sender (V6 Turbo) >> Installing Pulse Sender

Installing Pulse Sender

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw on pulse sender.
      • Initial tightening 3 Nm (2 ftlb.) 
      • Torque angle 90 Grad 
scientia non olet · About LEMON Manuals