Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Double screw for ignition coil | M6 x 45 - M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing torque support bracket to engine (top) | M8 x 45 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screw for torque support bracket - upper part to lower part | M10 x 35 | Tightening torque | 55 Nm (41 ftlb.) |