LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (48 Steering 2.0L -- 95B - MACAN (95B)) >> WM, 489019 Removing And Installing Power-Steering Gear >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install brake disc air guide.

    > 461619 - REMOVING AND INSTALLING BRAKE DISC AIR GUIDE - PORTION ON "INSTALLING"

  2. Install front-axle support.

    > 400819 - REMOVING AND INSTALLING FRONT-AXLE SUPPORT - PORTION ON "INSTALLING"

  3. Install front wheels.

    > 440519 - REMOVING AND INSTALLING WHEEL - PORTION ON "INSTALLING"

  4. Perform suspension alignment.

    > 449503 - PERFORMING FRONT/REAR SUSPENSION ALIGNMENT

  5. Teach steering lock settings.
    1. 5.1 Connect battery charger.

      > 2X00IN - BATTERY TRICKLE CHARGING

    2. 5.2 Connect the PIWIS Tester  to the vehicle and then select the power steering  control unit in the control unit overview.
    3. 5.3 Select the Automatic coding  function in the Coding/programming  menu, press F12 to start and follow the instructions on the PIWIS Tester  .
    4. 5.4 Disconnect the battery charger from the vehicle.
  6. Calibrate steering-angle sensor for PSM.

    > 456005 - CHECKING AND ADJUSTING STEERING-ANGLE SENSOR FOR PSM

scientia non olet · About LEMON Manuals