Further To 3: Mounting Wheel On The Vehicle
WARNING: This page is about a different variant/trim than selected.
Information
> 440519 - REMOVING AND INSTALLING WHEEL
- No force or impact tools allowed (for example, impact drivers).
- See description for removing and fitting wheels (fitting wheel on the vehicle).
- Install the wheels with the lowest residual imbalance values on the front axle. Be sure to note the running direction of the tyres.
- Fit wheel.
> 440519 - REMOVING AND INSTALLING WHEEL - PORTION ON "INSTALLING"
- Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening. Always observe the specified tightening torque.
> Tightening - torque 160 Nm (118 ftlb.)
- Set tyre pressure according to specifications (tyre pressure plate).