Installing Positive Crankcase Ventilation Hose
WARNING: This page is about a different variant/trim than selected.
- Installation is performed in reverse order. Pay particular attention to the following:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Positive crankcase ventilation hose
- 1.1
Replace sealing ring.
- 1.2
Screw in and tighten screw -6-
. Tightening torque 4 Nm (3 ftlb.)
- 1.3
Screw in and tighten screw -7-
. Tightening torque 9 Nm (6.5 ftlb.)