Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Fastening screw for cover for toothed belt |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Fastening screw for toothed-belt drive wheel |
|
Initial tightening |
10 Nm (7.5 ftlb.) |
|
|
| Fastening screw for toothed-belt drive wheel |
|
Final tightening |
+ 90° |
|
|