LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (17 Engine - Lubrication 2.0L -- 95B - MACAN (95B)) >> WM, 174019 - Removing And Installing Oil Cooler (R4) >> Installing Oil Cooler

Installing Oil Cooler

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace seal.
    2. 1.2  Tighten screws on oil cooler.

      > Initial - tightening 8 Nm (6 ftlb.) 

      > Final tightening + 45° 

scientia non olet · About LEMON Manuals