Securing Engine To Engine Crane
WARNING:
Danger of objects or loads falling down
- Risk of squashing or crushing
- → Secure components to prevent them from falling down.
CAUTION:
Heavy components
- Risk of squashing
- → Wear personal protective gear.
- → Get someone to help if necessary.
Information
- The pictures shown in this document may differ from the original.
- VAS 6100 - Workshop crane must be secured to the engine.
Workshop crane on engine
- 1.1 Engage one hook of the > 3033 - lifting tackle in the rear transport eyebolt -1- on the engine. Engage the other hook of the > 3033 - lifting tackle in the front transport eyebolt on the engine -2- .
- 1.2 > VAS 6100 - Workshop crane must be lifted up slightly. Then tension the spindles slightly, making sure that the > 3033 - lifting tackle is adjusted evenly.