Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Bearing pins for tensioning rail for left cylinder bank | Tightening torque | 23 Nm (17 ftlb.) | |||
| Screws on guide rail for left cylinder bank | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Bearing pins for guide rail for right cylinder bank | Replace following removal. | Initial tightening | 5 Nm (3.5 ftlb.) | ||
| Bearing pins for guide rail for right cylinder bank | Replace following removal. | Torque angle | + 45° | ||
| Bearing pins for tensioning rail for right cylinder bank | Tightening torque | 23 Nm (17 ftlb.) |