Installing Guide And Tensioning Rails - Left Cylinder Bank

WARNING: This page is about a different variant/trim than selected.

Install slide -1- .

1.1 Push slide -1- onto holder -2- until the locking lug -3- en gages in the cut-out -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Slide

Install guide and tensioning rails -1 and 2- .

2.1 Install guide rail -1- .
1. 2.1.1 Position guide rail -1- .
2. 2.1.2 Fit and tighten screws -3- .
  > Tightening - torque 9 Nm (6.5 ftlb.)

2.2 Install tensioning rail -2- .

2.2.2 Fit and tighten bearing pins -4- .

> Tightening - torque 23 Nm (17 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide and tensioning rails - left cylinder bank