Disassembling Double Clutch Transmission
WARNING: This page is about a different variant/trim than selected.
- Remove halfshaft flange.
- Remove drive plate.
- Remove the double clutch.
- Remove sealing ring for double clutch.
> 386955 - REMOVING AND INSTALLING SEALING RING FOR DOUBLE CLUTCH
- Remove drive shaft bearing.
- Remove ATF pan.
- Remove transmission control mechanism.
> 387719 - REMOVING AND INSTALLING TRANSMISSION CONTROL MECHANISM
- Remove ATF pump.
- Remove sealing ring for front output shaft.
- Remove wire harness.
- Remove sensor module.