LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (37 Automatic Transmission - Actuator, Housing 3.0L -- 95B - MACAN (95B)) >> WM, 373437 Disassembling And Assembling The Double Clutch Transmission >> Disassembling And Assembling The Double Clutch Transmission >> Assembling Double Clutch Transmission

Assembling Double Clutch Transmission

WARNING: This page is about a different variant/trim than selected.
  1. Install sensor module.

    > 381919 - REMOVING AND INSTALLING SENSOR MODULE

  2. Install wire harness.

    > 381819 - REMOVING AND INSTALLING WIRE HARNESS

  3. Install sealing ring for front output shaft.

    > 387055 - REPLACING SEALING RING FOR FRONT OUTPUT SHAFT

  4. Install ATF pump.

    > 385619 - REMOVING AND INSTALLING ATF PUMP

  5. Install control mechanism for transmission.

    > 387719 - REMOVING AND INSTALLING TRANSMISSION CONTROL MECHANISM

  6. Install ATF pan.

    > 375519 - REMOVING AND INSTALLING ATF PAN 

  7. Install drive shaft bearing.

    > 380919 - REMOVING AND INSTALLING DRIVE SHAFT BEARING

  8. Install sealing ring for double clutch.

    > 386955 - REMOVING AND INSTALLING SEALING RING FOR DOUBLE CLUTCH

  9. Install double clutch.

    > 304919 - REMOVING AND INSTALLING DOUBLE CLUTCH

  10. Install drive plate.

    > 136319 - REMOVING AND INSTALLING DRIVE PLATE

  11. Install halfshaft flange.

    > 392519 - REMOVING AND INSTALLING HALFSHAFT FLANGE

scientia non olet · About LEMON Manuals