LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 401519 Removing And Installing Upper Trailing Arm >> Removing Upper Trailing Arm

Removing Upper Trailing Arm

WARNING: This page is about a different variant/trim than selected.
  1. Remove upper trailing arm -1-  .
    G15155765Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper trailing arm

    1. 1.1 Unscrew nut -2-  for the clamping screw on the wheel bearing housing -3-  and pull clamping screw on wheel bearing housing -3-  out of the wheel bearing housing.
    2. 1.2 Loosen upper trailing arm -1-  from the wheel bearing housing.
    3. 1.3 Unscrew the relevant screw -4-  and counter at the nut -5-  .
    4. 1.4 Remove the relevant upper trailing arm -1-  .
scientia non olet · About LEMON Manuals