Installing Crankshaft Sealing Ring - Belt Side
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Hot components
- Risk of burns
- → Let hot components cool down.
- → Wear personal protective gear
- Fit guide sleeve -1-
from >
T40320 - assembly tool /2
on the crankshaft and position crankshaft sealing ring (belt side) -2-
.
Guide sleeve
Information
Leave guide sleeve fitted on the crankshaft.
- Install new
crankshaft sealing ring (belt side)-1-
.
Pressure piece
- 2.1 Fit pressure piece -2- from > T40320 - assembly tool /1 on the crankshaft with vibration damper -3- screw.
- 2.2 Press crankshaft sealing ring (belt side) -1- in as far as it will go.
- 2.3 Remove pressure piece -2- and guide sleeve from > T40320 - assembly tool /1.