Installing Control Unit For Fuel Pump

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Installation is performed in reverse order. Pay particular attention to the following:

   Tighten fastening nuts -1-  to > Tightening - torque 8 Nm (6 ftlb.)  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Control unit for fuel pump