LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (20 Fuel Supply, Actuator 2.9L -- 95B - MACAN (95B)) >> WM, 203819 - Removing And Installing Supply Line (V6 Turbo) >> Installing Supply Line >> Installing Supply Line - Underbody Section

Installing Supply Line - Underbody Section

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
  2. 1.1  Tighten screw on line bracket.
    • Tightening torque 9 Nm (6.5 ftlb.) 
  3. 1.2  Tighten screws on the protective plate.
    • Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals