LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (10 Engine - Crankcase, Suspension 3.0L -- 95B - MACAN (95B)) >> WM, 108319 Removing And Installing Engine Cover (Design Cover) (V6 Turbo) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  The rubber plug-in couplings must engage securely.
    2. 1.2  Check that the engine cover (design cover) is fitted securely by pulling on it.
scientia non olet · About LEMON Manuals