Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screws for engine carrier | M10 x 35 | Tightening torque | 50 Nm (37 ftlb.) | ||
| Screws for air-conditioning compressor bracket - | replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for air-conditioning compressor bracket - | replace | Final tightening | + 90° | ||
| Fastening screw for generator bracket to engine | M8 x 40/replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Fastening screw securing generator bracket to engine | M8 x 40 | Final tightening | + 90 (67 ftlb.) ° | ||
| Screw-type clamp securing pressure hose to pressure pipe | Tightening torque | 5.5 Nm (4.1 ftlb.) |