Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screw on tensioning roller | Tightening torque | 25 Nm (19 ftlb.) | |||
| Screws for air-conditioning compressor bracket - | replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw for deflection roller (generator) | M8 x 16.9 x 65 x 50 | Tightening torque | 25 Nm (19 ftlb.) | ||
| Screws on coolant control valve | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws for coolant pipes | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw for generator bracket to engine | M8 x 40/replace | Initial tightening | 8 Nm (6 ftlb.) |