Installing Brake Booster Vacuum Pump

1. 1.1 Replace sealing rings.
2. 1.2 Align vacuum pump driver.
3. 1.3 Tighten screws on vacuum pump -2-  .

   > Tightening - torque 9 Nm (6.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Vacuum pump

4. 1.4 Tighten screw on coolant line holder -6-  .

   > Tightening - torque 9 Nm (6.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Vacuum pump lines

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat shield

1. 2.1 Fit heat shield -1-  .
2. 2.2 Fit and tighten screws and nuts.

   Screws:  > Tightening - torque 8 Nm (6 ftlb.) 

   Nuts:  > Tightening - torque 8 Nm (6 ftlb.)