Technical Values
TIGHTENING TORQUE SPECIFICATION
| Location | Descri... | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Wheel to wheel hub on front and rear axle, M14 x 1.5 | Do not grease thread, shank and under the head (between screw head bearing surface and spherical cap ring) of the wheel bolts. Do not grease bearing surface of the spherical cap facing the wheel. If heavily soiled, clean bolts first with a lint-free cloth. Replace damaged wheel bolts (rework not permitted). | Tightening torque | 160 N.m (118 ft lb.) |