LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Wheel Suspension Front Drive Shaft 4.0L -- 718 SPYDER >> WM, 400819 Removing And Installing Front-Axle Support >> Removing And Installing Front-Axle Support >> Installing Front-Axle Support

Installing Front-Axle Support

  1. Installation is performed in reverse order.

    Observe specified tightening torques:

    G16221988Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for front-axle support

    1  Front-axle support
    2  Hexagon-head bolt/hexagon nut (M10) > Tightening torque 65 N.m (47.9 ft lb.) 
    3  Hexagon-head bolt (M6) > Tightening torque 10 N.m (7.4 ft lb.) 
scientia non olet · About LEMON Manuals