Technical Values
TIGHTENING TORQUE SPECIFICATION
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw securing tensioner to carrier for tensioning roller | Internal Torx, M8 x 33 | Tightening torque | 23 N.m (17 ft lb.) | ||
| Screw securing belt tensioner at the top to coolant pump bracket | Internal Torx, M8 x 60 | Tightening torque | 28 N.m (21 ft lb.) | +/- 3 N.m (2 ft lb.) | |
| Screw securing belt tensioner at the bottom to coolant pump bracket | Internal Torx, M8 x 26 | Tightening torque | 28 N.m (21 ft lb.) | +/- 3 N.m (2 ft lb.) |