Technical Values
TIGHTENING TORQUE SPECIFICATION
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screws securing strut to body | M10 | Tightening torque | 65 N.m (48 ft lb.) | ||
| Screws securing engine carrier to cylinder block | M10 | Tightening torque | 65 N.m (48 ft lb.) | ||
| Nuts securing engine carrier to body | M10 | Tightening torque | 65 N.m (48 ft lb.) | ||
| Screw on spacer sleeve | Hexagon-head bolt, M10 x 40 - tighten using special tool 9836/1 | Tightening torque | 50 N.m (37 ft lb.) |