Subsequent Work

Information 

• New parking-brake shoes and new brake discs must be grinded down. 
• Grinding applies only to vehicles with grey cast-iron brakes. 
• PCCB brake discs/parking-brake shoes do not need to be grinded down. 
• There is no need to grind down the parking-brake shoes if the parking-brake shoes are not replaced. Set the brake shoes to the basic setting if necessary and calibrate the brakes 

> 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .

1. Install wheel bearing housing/spring strut unit in the vehicle.

   > 427119 REMOVING AND INSTALLING REAR SPRING STRUT .