Technical Values
TIGHTENING TORQUE SPECIFICATION
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Lower trailing arm to front-axle cross member | M12 x 1.5 x 90 | Initial tightening | 70 N.m (52 ft lb.) | ||
| Lower trailing arm to front-axle cross member | M12 x 1.5 x 90 | Final tightening | + 180° | ||
| Lower trailing arm to wheel bearing housing (GT4/Spyder) | Screw/lock nut, M12 x 1.5/always replace following removal | Tightening torque | 120 N.m (89 ft lb.) | ||
| Control arm (diagonal arm) to lower trailing arm | Hexagon-head bolt, M14 x 1.5 and hexagon nut | Tightening torque | 160 N.m (118 ft lb.) | ||
| Level sensor to holder on wishbone | Lock nut | Tightening torque | 10 N.m (7.5 ft lb.) |