Technical Values
TIGHTENING TORQUE SPECIFICATION
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Front-axle support on rear body | Hexagon nut | Tightening torque | 65 N.m (47.9 ft lb.) | ||
| Front-axle support on center body | Hexagon-head bolt (M10 x 16) | Tightening torque | 65 N.m (47.9 ft lb.) | ||
| Coolant pipes on front-axle support | Hexagon screw (M6) | Tightening torque | 10 N.m (7.4 ft lb.) | ||
| Front-axle support on front-axle carrier - step 1 | Hexagon nut (M10) - replace | pre-tightening | 65 N.m (47.9 ft lb.) | ||
| Front-axle support on front-axle carrier - step 2 | Hexagon nut (M10) - replace | untighten | - 270° | ||
| Front-axle support on front-axle carrier - step 3 | Hexagon nut (M10) - replace | final tightening | 30 N.m (22.1 ft lb.) | ||
| Front-axle support on front-axle carrier - step 4 | Hexagon nut (M10) - replace | final-tightening | + 45° | ||
| Hydraulic pump holder for lift system on front-axle support | Screw (M10 x 30) | Tightening torque | 25 N.m (18.4 ft lb.) |