LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - 718 SPYDER >> WM, 519419 Removing And Installing Cover For Rear Underbody >> Installing Cover For Rear Underbody

Installing Cover For Rear Underbody

  1. Installation is performed in reverse order.
  2. Tighten screws to > Tightening torque 9.7 (7.5 ftlb.) Nm  .
  3. Tighten screws to > Tightening torque 3 (2 ftlb.) Nm  .
  4. Tighten nuts to > Tightening torque 2.5 (1.75 ftlb.) Nm  .
scientia non olet · About LEMON Manuals