LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 47 Brakes - Brake Hydraulic System, Regulator, Booster 4.0L -- 718 SPYDER >> WM, 471519 Removing And Installing Brake Master Cylinder >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

  1. Installation is performed in reverse order to removal.

    Fastening nuts on brake master cylinder > Tightening torque 49 N.m (36 ft lb.) +/- 4 N.m (3 ft lb.)  .

    Fastening screw securing brake fluid reservoir to brake master cylinder > Tightening torque 8 N.m (6 ft lb.)  .

    Cap screws securing brake lines to brake master cylinder > Tightening torque 16 N.m (12 ft lb.)  .

scientia non olet · About LEMON Manuals