Installing Front Roof Frame

1. Installation is performed in reverse order to removal.
2. Tighten fastening screws to the specified tightening torque.

Fastening screws for inner roof frame. > Tightening torque 9 N.m (6.5 ft lb.) +/- 1 N.m (0.5 ft lb.) 

Fastening screws for rear roof frame. > Tightening torque 9 N.m (6.5 ft lb.) +/- 1 N.m (0.5 ft lb.) 

Fastening screws for filler pieces. > Tightening torque 9 N.m (6.5 ft lb.)