Subsequent Work
NOTE:
Risk of damage to cover if excessive heat is applied.
- Creases in cover
→ If creases have formed, only short partial warming with the hot-air gun is permissible.
→ The hot-air temperature of 50°C must always be observed.
- If creases have formed, partially heat the cover with a hot-air gun and smooth out the cover using special tools.
> 9747 - Wetting-off iron
> 9747/1 - Knurling iron
> 9747/2 - Bone burnisher
> V.A.G 1416 - Hot-Air Blower
Information
For vehicles without air-conditioned comfort seat.
- Install cover for front middle backrest.
> 742019 REMOVING AND INSTALLING COVER FOR FRONT MIDDLE BACKREST
Information
For vehicles with air-conditioned comfort seat.
- Secure cover for front middle backrest correctly.
> 742019 REMOVING AND INSTALLING COVER FOR FRONT MIDDLE BACKREST (AIR-CONDITIONED COMFORT SEAT)
- Install front seat.