LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Seats >> 74 Seat Cushions, Seat Covers -- 718 SPYDER >> WM, 741019 Removing And Installing Padding For Front Seat (Air-Conditioned Comfort Seat) >> Subsequent Work >> Checking Seat Following Removal

Checking Seat Following Removal

  1. Connect the removed seat to the vehicle's wiring harness via > 9745 - test cable  and > 9745/1 - test cable  .
  2. Connect electric plug connection on trim panel for seat.

    > 721619 REMOVING AND INSTALLING TRIM PANEL FOR SEAT

  3. Connect the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

  4. Switch on the ignition.
  5. Carry out a function test on the seat components.
  6. Switch off ignition after the function test and disconnect the battery.

    > 740919 REMOVING AND INSTALLING SUCTION FAN FOR SEAT SURFACE 

  7. > 9745 - Test cable  and > 9745/1 - test cable  can now be disconnected.
  1. Install suction fan for seat surface.

    > 741319 REMOVING AND INSTALLING COVER FOR FRONT SEAT 

  2. Install cover for front seat.
scientia non olet · About LEMON Manuals