LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 Linings, Insulation -- 718 SPYDER >> WM, 70811931 Removing And Installing Trim Panel For Roll-Over Bar >> Installing Trim Panel For Roll-Over Bar

Installing Trim Panel For Roll-Over Bar

Installation is performed in reverse order to removal.

Tighten fastening screws for trim panel for roll-over bar to the specified tightening torque. > Tightening torque 5.6 N.m (4 ft lb.) 

scientia non olet · About LEMON Manuals