LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 Linings, Insulation -- 718 SPYDER >> WM, 70081931 Removing And Installing Trim Panel For Convertible Top Compartment/Engine Compartment Lid >> Removing Trim Panel For Convertible Top Compartment/Engine Compartment Lid

Removing Trim Panel For Convertible Top Compartment/Engine Compartment Lid

G16224435Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of convertible top compartment/engine compartment lid

  1. Move convertible top into a partly opened position.
  2. Loosen fixing clips -1-  on rear convertible top covering.
    G16224436Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Convertible top covering

  3. Press trim panel for convertible top compartment/engine compartment lid down in the rear area (arrows) -A-  and pull it forward.
    G16224437Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing trim panel for convertible top compartment/engine compartment lid

  4. Pull trim panel for convertible top compartment/engine compartment lid forward in the front area (arrows) -B-  . Fold trim panel together slightly and remove by pulling it up.