Removing Trim Panel For Rear Lid

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of trim panel for rear lid

1. Open the lid.
2. Heat trim panel -1-  in the bonding surface area -2-  using > V.A.G 1416 - Hot-Air Blower  or > VAS 1978/14A - Hot-Air Blower  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Heating trim panel

3. Lever off trim panel -2-  using a plastic wedge -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Levering off trim panel

4. Dissolve residual adhesive on the lid and trim panel using isopropyl and remove it.