LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper -- 718 SPYDER >> WM, 635519 Removing And Installing Rear Bumper >> Technical Values

Technical Values

TIGHTENING TORQUE SPECIFICATION

Location Des... Type Basic val... Toleranc... Toleranc...
Fastening screws at bottom of rear apron   Tightening torque 3.2 N.m (2.4 ft lb.)    
G16223718Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws at bottom
Fastening screws at bottom of rear bumper at bottom   Tightening torque 4.5 N.m (3.3 ft lb.)    
G16223719Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lower fastening screws at the centre
Fastening screws for rear bumper wheel house   Tightening torque 3.2 N.m (2.4 ft lb.)    
G16223720Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws wheel house
Fastening screws at top of rear bumper   Tightening torque 3.2 N.m (2.4 ft lb.)    
G16223721Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws at top