Removing Rear Bumper
- Release and disconnect electric plug connection for the ParkAssist sensors -1-
.
Electric plug connection for Park Assist sensor
- Release and disconnect electric plug connection on reversing camera control unit -1-
.
Electric plug connection for reversing camera control unit
- Unscrew screws at the bottom -1-
.
Screws at the bottom
- Unscrew screws in the centre at the bottom -1-
.
Bottom centre screws
- Unscrew screws -1-
in the wheel housing.
Screws in wheel housing
- Unscrew fastening screws at the top -1-
and remove rear bumper -Arrow-
.
Screws at the top