LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper -- 718 SPYDER >> WM, 631519 Removing And Installing Front Apron >> Removing The Front Bumper

Removing The Front Bumper

  1. Unscrew bottom screws -1-  .
    G16223694Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bottom screws

  2. Unscrew screws -1-  in the wheel housing.
    G16223695Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wheel housing screws

    Information 

    • Only for vehicles with headlight cleaning system. 

    Information 

    • A tight hose can be pulled off more easily after heating it with a hot-air gun. 
    • Collect washer fluid in a suitable container. 
  3. Remove washer fluid hose -1-  .
    G16223696Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting washer fluid hose for headlight cleaning system

    1. 3.1 Press clip -2-Arrow A-  and pull off -3-  water hose -Arrow B-  .
    2. 3.2 Disengage -1-  and disconnect water hose -Arrow C-  for headlight cleaning system -Arrow D-  .
  4. Unclip clips, then unlock and remove electric plug connection -1-  in the wheel house.
    G16223697Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection wheel house

  5. Pull off retaining clip -1-  using > T10118 - assembly tool  . -Arrow- 
    G16223698Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Retaining clip

    Information 

    The help of another person is required.

  6. Unscrew screws -1-  and remove front bumper -2-  by pulling it forward. -Arrow- 
    G16223699Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Top screws