LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper -- 718 SPYDER >> WM, 631519 Removing And Installing Front Apron >> Installing Front Bumper

Installing Front Bumper

Installation is performed in reverse order. Pay particular attention to the following:

  1. Tighten screws to > Tightening torque 3.2 N.m (2.4 ft lb.) +/- 0.6 N.m (0.4 ft lb.) 
  2. Tighten screws to > Tightening torque 3.2 N.m (2.4 ft lb.) +/- 0.6 N.m (0.4 ft lb.) 
  3. Tighten screws to > Tightening torque 3.2 N.m (2.4 ft lb.) +/- 0.6 N.m (0.4 ft lb.) 
scientia non olet · About LEMON Manuals